Intellijel Case 7U 104HP

Intellijel Case 7U 104HP

  • Solid plastic carrying handle.
  • Anodized aluminum lid with latches, deep enough to close the case with cables patched in.
  • Retractable feet that can support the case at two different angles. Or lay the case flat on a table.
  • Plastic feet for resting the case on the table.
  • Rubber feet on bottom side of lid so the case can stand vertically with the lid attached.
  • Spring-loaded latching accessory slots on top and bottom of the case. The slots can be used to attach two cases together and for the carrying strap.

  • Four 1/4″ audio jacks that can be connected to the Audio I/O 1U. Two ins and two outs.
  • MIDI In, Out, and Thru jacks. The In jack can be connected to the µMIDI 1U and will pass to the Thru. The Out is for future expansion.
  • USB port that connects to the µMIDI 1U and other future modules.
  • Max. internal depth for modules: 70 mm 
  • Internal depth for modules above the highest point of the power bus board:  53 mm
  • Rocker switch and barrel plug for power entry.

  • Outside dimensions with lid:  312 mm x 165 mm x 546 mm
  • Outside dimensions without lid: 312 mm x 83 mm x 546 mm
  • Weight: 2.7 kg with lid, 3.0 kg with lid and power adapter*
  • Power: TPS80WMAX +12 V output at 3000 mA, -12 V output at 3000 mA, +5 V output at 1500 mA

상기 이미지의 모듈은 제공되지 않습니다.



계좌번호 : KB국민은행 194601-04-263479 옥토모   


문의 : +82) 010 4035 9025 | Email :

데모룸 주소 : 서울시 은평구 통일로 596 2F 옥토모 & 모듈라서울 운영본부 

상호 : 옥토모 | 대표 : Lim Yong Ju | 사업자등록번호 : 876-44-00338 

사업소재지 : 경기도 고양시 일산동구 경의로 25-37 201-409 

통신판매업신고번호 : 제 2018-고양일산동-0441호 

개인정보책임자 : Lim Yong Ju | 호스팅 제공자 : (주)아임웹